|
Printable PDF  | Print-friendly HTML  | Subscribe to Patton NewsWire |
Patton Adds T1 and E1 Extenders to CopperLink™ Line
January 30, 2007
The new CopperLink-T™ Models 2113 and 2115 triple the reach of TDM circuits while cutting the required copper infrastructure in half.
CopperLink™... Going the Distance
GAITHERSBURG, Maryland: Patton Electronics — the industry leader in network access, connectivity, and Voice-over-IP — announces general availability of the new CopperLink-T™ T1/E1 extenders.
Patton's Models 2113 and 2115 redefine the limits of traditional TDM technology, tripling the normal reach of T1/E1 circuits while cutting the required number of copper pairs in half.
Enterprises and integrators can use these transparent, plug-and-play devices to eliminate Telco tariffs and installation charges by connecting remote PBXs over existing dry copper.
Carriers and service providers can reach expanded subscriber populations with half the required copper, by using using CopperLink-T™ to extend T1/E1 TDM circuits without repeaters to more than 3.5 miles/almost 5 kilometers over a single twisted pair.
CopperLink-T™ solutions can also support T1/E1 extension between buildings or across campus, as well as T1/E1 backhaul from a remote site, T1/E1 relocation, and last-mile TDM delivery.
"If you like CopperLink™ Ethernet Extenders, you'll love our CopperLink-T™ line," said Joseph Gomez, Patton's Senior Product Manager. "We designed these T1/E1 Extenders with the same simple problem-solving approach. Just connect the wiring at each end, and you'll be up and running in minutes."
Designed for plug-and-play, back-to-back operation, the CopperLink-T™ Extenders deliver TDM circuit extension with no required configuration. Simply connect the PBX circuit to the T1 or E1 ports and the line interfaces to a dry copper pair. For ease of installation, the two active pins on the RJ connector are polarity insensitive. So it doesn't matter which wire you connect to which pin.
CopperLink-T™ extenders operate in clear-channel mode to transparently extend data and voice bearing circuits-including the T1 F-bit. The Model 2115 T1 extender comes with an RJ-48C connector. The Model 2113 E1 extender includes dual-BNC and RJ-48C connectors.
For hi-resolution images of the CopperLink-T™ 2113 and 2115, go to Patton’s media resources page and click on Ethernet Extenders.
About Patton
Patton is a multi-national organization that manufactures voice and
data-communications equipment for carrier,
enterprise,
and industrial
networks worldwide. Incorporated in 1984, Patton markets a catalog
of over 1000 products including SmartNode™
VoIP solutions that support SIP, H.323, and MGCP for analog and ISDN telephony; ForeFront™
multi-service access infrastructure solutions for TDM and IP service delivery
(T1/E1, G.SHDSL, xDSL, dial-up); IPLink™
CPE solutions for last-mile/local-loop access (WAN routers, modems, remote
access servers, NTUs, CSU/DSUs); CopperLink™
Ethernet Extenders; EtherBITS™
device servers; EnviroNET™
NEMA4-compliant hardened networking equipment, and a full range of
network-connectivity Micro-Products
(interface converters, short-range modems, multiplexers, surge protectors).
For more information or to request a free datacom catalog contact sales@patton.com.
Patton Electronics Company
7622 Rickenbacker Drive
Gaithersburg, MD 20879 USA
Tel: (301) 975-1000
Fax: (301) 869-9293
Email: marketing@patton.com
Web: www.patton.com
###
|
|
|
|
