BRI Line Ordering Information 
  
ISDN Ordering Codes 

Service Provider: If supported, use one of the following ISDN ordering codes to configure the ISDN line. 

EZ-ISDN 1 
Capability S 
Long Distance Carrier (select one)

AT&T( )  MCI( )  Sprint( )  Other ( ) 
BRI Configuration Information

Service Provider: If neither ordering code (EZ-ISDN 1 or Capability S) is supported,
use the following information to configure the ISDN line.

Switch Type:

( )National ISDN 1 		(preferred)
( )AT&T  5ESS      		 (Lucent)
( )Northern Telecom DMS 100 	 (Nortel)

Protocol:
	
( )National ISDN 1 		
( )Custom

SPID Numbers (One for Each B Channel)

SPID Numbers do not have any spaces or dashes

( )National ISDN 1 (xxxyyyzzzz0101, e.g. 61255512120101) 
( )Northern Telecom DMS 100 Custom (xxxyyyzzzz01, e.g. 612555121201) 
( )AT&T 5ESS National (01yyyzzzz000, e.g. 015551212000) or (xxxyyyzzzz0101, e.g. 61255512120101) 
( )AT&T 5ESS Custom (01xxxyyyy0, e.g. 0155512120)
 

Line 1 SPID 1 ________________ TID*____ 
SPID 2 _________________ TID*____ 
* If NI1, obtain the terminal ID (TID)

DN Numbers(Directory Number is the ISDN Phone Number for  Each  B Channel)
 
Directory Numbers do not have spaces or dashes

( )National ISDN 1 (xxxyyyzzzz, e.g. 6125551212) 
( )Northern Telecom DMS 100 Custom (xxxyyyzzzz, e.g. 6125551212) 
( )AT&T 5ESS National (yyyzzzz, e.g. 5551212) 
( )AT&T 5ESS Custom (xxxyyyy, e.g. 5551212) 

Line 1 DN1 ________________________ DN2_________________________

Note: If the area code is included in the SPID number, include it in the DN. However,
 if you are using Windows 2000, do not include the area code in the DN.

Additional Ordering Information

•	Circuit switch data and voice (CSD/CSV) on each B channel 
•	Enable outgoing and incoming calls on each B channel 
•	Dynamic TEI 
•	Multipoint bus configuration 
•	Terminal type A (AT&T Custom switch only) 
•	No EKTS or other special services or features 
•	RJ45 jack (preferred)