Channelized T1 Line Ordering Information 
  
Channelized T1 Configuration Information

Circuit ID Number	Circuit ID Number: _________________

Support Phone Number	Service Provider Support Telephone Number: ____________________ 

Support Contact Name (if possible): ____________________________________

Framing Mode:

( )ESF (recommended) 
( )D4
Line Encoding
( )B8ZS (recommended)
( )AMI
One or Two Way Service:

( )One Way –Ability to only receive calls (dial in) 
( )Two Way –Ability to receive or generate calls (dial out)

Phone Numbers & Hunt Groups:
	When you order a T1 line, you get the equivalent of 24 telephone lines.
Each line can have a different phone number or the lines can be organized in
hunt groups with the same phone number. Talk to your service provider about
available hunt group options.

Service Termination:

( )Smart Jack (RJ-68) (recommended) 
( )RJ-48C
Supervisory Signaling Method:

( )Ground Start
( )Loop Start
( )Immediate Start
( )E&M II with Wink (Wink Start)
Number of wink digits ________ (default is 4)


Addressing:

( )DTMF (Dual Tone Multi-Frequency) (recommended)
( )Pulse-Dial
Span Type:

( )Short Haul
( )Long Haul
Short Haul Line Length:

( )0-133 feet 
( )134-266 feet 
( )267-399 feet 
( )400-533 feet 
( )534-655 feet	

Long Haul Level:

( )0.0 dB 
( )-7.5 dB 
( )-15.0 dB 
( )-22.5 dB
Provisioning Notes:

Circuit ID Number: This is a code assigned by your service provider to
identify your (physical) T1 circuit (one 
code per T1 line).  This is required information to troubleshoot
 T1 circuit issues. 
Support Phone Number:______________
The telephone number needed to contact your service provider for T1 circuit 
troubleshooting assistance.