Model 2089
Interface Powered, RS-232 (EIA-574) to RS-485 Interface Converter (with Handshaking)
Connect RS-485 Data Acquisition & Control Equipment to a DB-9 (RS-232) Equipped PC or Workstation



Need help?
Call Patton at +1 301 975 1000 or email sales@patton.com.

Features & Benefits
  • Fully Conforms to the EIA RS-485 Standard
  • Data Rates to 115,200 bps
  • Range Up to 9 Miles (14.5 Km)
  • No AC Power or Batteries Required
  • Up to 50 Terminal Drops in a Multipoint Polling Environment
  • 600 Watts of Silicon Avalanche Diode Surge Protection - Standard


Overview
The Model 2089 is Patton's first high speed EIA-574 (RS-232 on a DB-9) to RS-485 interface converter. Supporting async data rates to 115.2 kbps over one or two unconditioned twisted pair, the Model 2089 passes one control signal in each direction. The Model 2089 can handle up to 50 terminal drops in a multipoint polling environment; yet it is small enough to plug directly into a DB-9 serial port...and requires no AC power or batteries for operation. The Model 2089 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. Silicon Avalanche Diode surge protection is standard as well. Amazing!

Specifications

Transmission Format: Asynchronous
Data Rate: Up to 115,200 bps
Range: Up to 9 miles (14.5km)
EIA-574 Interface: DB-9, male or female
RS-485 Interface Options: RJ-11 or RJ-45 jack, terminal block with strain relief
Transmit Line: 2, 4 wire unconditioned twisted pair
Transmit Mode: 4-wire, full or half duplex; 2-wire half duplex
Control Signals: DSR turns "ON" immediately after the terminal raises DTR; DCD turns "ON" after recognizing the receive signal from the line; CTS turns "ON" after the terminal raises RTS.
RTS/CTS Delay: 0 or 8 msec
Carrier: The carrier is switch selected either continuous operation or controlled by RTS
Surge Protection: 600W power dissipation at 1 mS
Power: Draws operating power from EIA-574 data and control signals; no AC power or batteries required.
Temperature: 32° to 122° F (0° to 50° C)
Size: 2.50" x 1.20" x 0.75" (6.4 x 3.0 x 1.9 cm)


Ordering Information Email: sales@patton.com    Tel: +1 301-975-1000
2089F RS232/RS485 CONVERTER, DB9F
2089F RJ11 RS232/RS485 CONVERTER,DB9F/RJ11
2089F RJ45 RS232/RS485 CONVERTER,DB9F/RJ45
2089M RS232/RS485 CONVERTER, DB9M
2089M RJ11 RS232/485 CONVERTER,DB9M/RJ11
2089M RJ45 RS232/RS485 CONVERTER,DB9M/RJ45
 

Related Information
Catalogs (PDF) -- Requires Adobe Acrobat to view
Patton Electronics Product Line Catalog #21 (High resolution, print quality) August 25, 2008
Patton Electronics Product Line Catalog #21 (Low resolution, for dial-up users) August 25, 2008

Certifications (PDF) -- Requires Adobe Acrobat to view
Declaration of Conformity - LVD - SRMs & Interface Converters March 12, 2009
Declaration of Conformity - EMC - SRMs & Interface Converters March 04, 2009
Declaration of Conformity - EMC - 00109DDL February 23, 1999

Data Sheets (PDF) -- Requires Adobe Acrobat to view
Network Access Solutions Guide November 01, 2000

Manuals (PDF) -- Requires Adobe Acrobat to view
Model 2089 Manual January 25, 2008

News Releases
With Over 1,000 Networking Products to Offer, Patton Publishes Dual Catalogs May 22, 2007
Patton Receives Technology Champion Award February 01, 2006

Tech Notes
Distance Table for Converter Models 2085 & 2089 November 11, 1998
Distance Table for Models 2085, 2089, & 2085RC. December 16, 1997