What is the pin-out for the RJ45 to DB-9 converter?
Article Id #: 278
To connect to the RS232 port you need a straight through cable and a RJ48C to DB-9 converter. These were included with your remote access server but if you have lost them, the pin-out for the converter is as follows:
RJ45 DB9 1 - 6 Data Set Ready 2 - 1 Carrier Detect 3 - 4 Data Terminal Ready 4 - 5 Signal Ground 5 - 2 Received Data 6 - 3 Transmitted Data 7 - 8 Clear to Send 8 - 7 Request to Send