Ethernet Isolators / Converters / Modems
FiberPlex FOI-1GBT Fiber Optic Isolator/Converter/Modem - 1000BASE-T; mission critical packaging



Packed in rugged military style metal enclosures, the FOI-1GBT supports 1000 Mbps Ethernet over Fiber.


Overview
The FOI-1GBT is a rock-solid plug-and-play device that does media conversion and extension of Ethernet over fiber. The unit provides complete electrical isolation for 1000BASE-T Gigabit Ethernet communications. The unit can be used in areas of high electrical noise or in and out of RF shielded enclosures.

The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. Privacy of communications is also enhanced because the fiber optic cable does not radiate any emissions. In addition, fiber optic cable offers much longer transmission distances than copper wiring.

Traditional 1000BASE-T Cat5e cabling is limited to a maximum distance of 100m, but multimode optics on the unit can extend the distance to 550m, while singlemode optics can further extend the distance to 5km.

The copper interface is fully automatic. If TP+ and TP- are reversed, the unit will automatically swap the polarity internally. Similarly, if the transmit and receive pairs are reversed, the unit will automatically swap both pairs internally.

FOI version units can be mounted in several redundant powering chassis; rack and wall mount options including TEMPEST and NEMA alternatives.

Applications
A typical link consists of two FOI-1GBTs, one at each end of the network, with a duplex fiber optic cable in between.

FOI-1GBT applications


Features
  • Extends 1000BASE-T Ethernet up to 1,804 feet (550 m) over multimode cable, 3.1 miles (5.0 km) over singlemode
  • Compliant with IEEE 802.3ab
  • Supports Data Rate of 1000 Mbps
  • Optically compatible with Ethernet optical standards (Multimode: 1000BASE-T to 1000BASE-SX; Singlemode: 1000BASE-T to 1000BASE-LX)
  • Automatic polarity correction and MDI/MDIX switch over capability.
 
Ordering
# Model # Description Availability
1 FOI-1GBT-S-ST 1000 Base-T fiber isolator, Singlemode., Power Options Sold Separately General Availability
 
 Accessories

2 FOI-1GBT-ST 1000 Base-T fiber isolator, Multimode., Power Options Sold Separately General Availability
 
 Accessories


 


 
 
Sales: sales@patton.com
Direct: +1 301 975 1000
Support: support@patton.com
Direct: +1 301 975 1007
Have Us Contact You
or
Login Connect with us
Twitter Linkedin Facebook Youtube
 
     Copyright © 2001–2019 Patton Electronics Co., All Rights Reserved.

|  Sitemap  |   Legal  |   Privacy Policy  |   Disclaimer  |    Twitter  Facebook  YouTube  LinkedIn  RSS