This legacy product is not recommended for new installations. For next-generation alternatives, please see Patton's Model 3088 Series DSL NTUs.


Overview
Supporting line rates from 144 kbps to 1.168 Mbps, the NetLink 1094A provides “megabyte” speeds for leased lines, LAN-to-LAN interconnections, and WAN access networks located up to 4.6 miles (7.3 km) apart (see distance table below).

Model

The 1094A standalone version supports DTE speeds from 64 kbps to 1.152 Mbps in 64-kbps increments. It includes built-in loopback diagnostics, in-band SNMP/HTTP remote management capabilities, and accessible (DIP) configuration switches.

Model

As a symmetric modem, the NetLink 1094A HDSL modem uses 2B1Q modulation to provide the same data rates in both directions over a single pair of regular telephone lines. Featuring replaceable DCE-DTE interface modules, the NetLink HDSL modem can support a wide range of applications, including Ethernet LAN bridging, G.703/G.704 line extension/termination and V.24/RS-232, V.35, RS-422/530, and X.21 interfaces.

A high density 2U-high rack card version of the NetLink HDSL modem (the 1094ARC is also available).

The Model 1094A is fully compatible with Patton's low-cost Model 1089 standalone modem.



Features
  • Supports multiple line rates from 144 kbps to 1.152 Mbps
  • DTE speeds from 64 kbps to 1.024Mbps in increments of 64 kbps
  • Standards-based support (CE Mark)
  • Available with internal 90—260 VAC or -48 VDC power supplies
  • Built-in loopback functionality
  • A variety of modular interfaces.