Knowledgebase Article
Knowledgebase > Unified Communications > SmartNode > SmartMedia > SN10K

Configuring SnmpAgent
Article Id #: 401

Configuring SnmpAgent


Once you are logged into the Web Portal and have successfully activated the SnmpAgent application, follow these steps to configure the application to suit your needs:

Configuring SNMP system parameters

  • Under the Applications heading, in the Web Portal navigation panel, click the Configurations tab.

Snmp cfg click configurations.gif

  • In the Application Configuration List, find the entry for tbsnmpagent and click the link labeled edit, next to that entry.

Snmp cfg click edit.gif

The tbSnmpAgent Application Configuration window is divided into several sections, which may be of interest to customers

  1. Under the Application Params heading, the following general application parameters can be configured:
    • SNMP IP Port: the IP port to use for making SNMP requests (standard default value is 161)
    • SNMP System Description: the textual description that will appear when polling the sysDescr variable of the SNMPv2-MIB
    • SNMP System Object ID: the value appended to TelcoBridges' value (. for the SNMPv2-MIB variable sysObjectId
    • SNMP System Name: the textual description that will appear when polling the sysName variable of the SNMPv2-MIB
    • SNMP System Location: the textual description that will appear when polling the sysLocation variable of the SNMPv2-MIB
    • SNMP System Contact: the textual description that will appear when polling the sysContact variable of the SNMPv2-MIB

  2. Under the Advanced Params heading, the following general application parameter can be configured:
    • Polling delay to generate traps: this sets the length for the time intervals at which the SNMP agent polls for newly generated traps. The value entered is in seconds

      Snmp cfg advanced params.gif

Configuring SNMPv1, SNMPv2c

  1. Under the SNMPv1 SNMPv2c Communities heading, new communities can be created for SNMP versions 1 or 2:
    • By default, the standard communities public (read-only access), and private (read-write access) have been created
    • Click Create new community to create a new community for SNMPv1, or SNMPv2

      Snmp cfg communities.gif

Configuring SNMPv3

  1. Under the SNMPv3 Users heading, new users can be created for SNMP version 3:
    • By default, no SNMPv3 users are created
    • Click Create new SNMPv3 user to create a new user definition for SNMPv3

      Snmp cfg create user.gif

Note: If SNMPv3 is used for security reasons, SNMPv1 and SNMPv2 users should be removed completely from the configuration.

Configuring traps

  1. Under the SNMP Trap Destinations heading, destination addresses for SNMP traps can be defined:
    • By default, no SNMP trap destinations are defined
    • Click Create New SNMP Trap Destination to create a new destination for sending SNMP traps to

      Snmp cfg create trap.gif

  2. Under the Log Params heading, logging parameters for the application can be set. The directory and format that logs are stored in can be selected.

  3. Under the Advance Params heading, operational time delays ca be modified.
User Rating
This answer was helpful This answer was not helpful (1465 vote(s)) 
User Comments  Add a Comment )

Direct: +1 301 975 1000
Direct: +1 301 975 1007
Have Us Contact You
Login Connect with us
Twitter Linkedin Facebook Youtube
     Copyright © 2001–2017 Patton Electronics Co., All Rights Reserved.

|  Sitemap  |   Legal  |   Privacy Policy  |   Disclaimer  |    Twitter  Facebook  YouTube  LinkedIn  RSS