Knowledgebase

 
 
Knowledgebase Article
Knowledgebase > Unified Communications > SmartNode > SmartMedia > SN10K


SN10k MTP3 Specifications
Article Id #: 417

Specifications

 

SmartMedia implementation of MTP3 functionality conforms to the following standards:

  • ETS 300 008 – Integrated Services Digital Network; CCITT Signaling System No 7, Message Transfer Part to Support International Interconnection, ETSI.
  • GF001-9001 – Technical Specifications of SS7 for National Telephone Network of China, CHINA.
  • GR-246, Issue 3, T1.111.4 – Signaling Network Functions and Messages, Bellcore, December 1998.
  • GR-246, Issue 3, T1.111.5 - Signaling Network Structure, Bellcore.
  • GR-246, Issue 3, T1.111.7 - Testing and Maintenance, Bellcore.
  • INTERNET-DRAFT– SS7 MTP3-User Adaptation Layer (M3UA).
  • IS 7498 – Open Systems Interconnection – Basic Reference Model, ISO.
  • IS 7498 DAD 1 – Open Systems Interconnection – Basic Reference Model Addendum 1: Connectionless, Data Transmission, ISO.
  • JT - Q.704 – MTP Signaling Network Functions, Telecommunication Technology Committee (TTC), Japan.
  • JT - Q.707 – MTP Testing and Maintenance, Telecommunication Technology Committee (TTC), Japan.
  • Q.700 – Introduction to CCITT Signaling System No. 7, CCITT.
  • Q.701 – Functional Description of the Message Transfer Part of Signaling System No.7, CCITT.
  • Q.702 – Signaling Data Link, CCITT.
  • Q.703 – Signaling Link, CCITT.
  • Q.704 – Signaling Network Functions and Messages, CCITT.
  • Q.705 – Signaling Network Structure, CCITT.
  • Q.706 – Message Transfer Part Signaling Performance, CCITT.
  • Q.707 – Testing and Maintenance, CCITT.
  • Q.708 – Number of International Signaling Point Codes, CCITT.
  • Q.709 – Hypothetical Signaling Reference Connection, CCITT.
  • Q.710 – Simplified MTP Version for Small Systems, CCITT.
  • Q.752 – Monitoring and Measurements for Signaling Systems No.7 Networks, CCITT, 1997.
  • Q.782 – MTP Level 3 Test Specification, CCITT.
  • Q.2140 – MTP Level 3 Functions and Messages Using the Services of ITU Q.2140, ITU.
  • Q.2210 – MTP Level 3 Functions and Messages Using the Services of CCITT Recommendation Q.2140, ITU.
  • RFC 2719 – Framework Architecture for Signaling Transport, IETF.
  • T1.111.4 – Signaling Network Functions and Messages, ANSI.
  • T1.111.5 - Signaling Network Structure, ANSI.
  • T1.111.7 - Testing and Maintenance, ANSI.

 

Protocol variants

  • ANSI (used for ANSI88 and ANSI92)
  • ANSI96 (used for ANSI96 and TELCORDIA)
  • ITU (used for ITU88, ITU92, ITU97, Q767, SINGAPORE and ETSI)
  • CHINA
User Rating
This answer was helpful This answer was not helpful (1029 vote(s)) 
User Comments  Add a Comment )

 
 
 
Sales: sales@patton.com
Direct: +1 301 975 1000
Support: support@patton.com
Direct: +1 301 975 1007
Have Us Contact You
or
Login Connect with us
Twitter Linkedin Facebook Youtube
 
     Copyright © 2001–2017 Patton Electronics Co., All Rights Reserved.

|  Sitemap  |   Legal  |   Privacy Policy  |   Disclaimer  |    Twitter  Facebook  YouTube  LinkedIn  RSS