Home          Contact Us          eNews          Partners          Training  
         
 
 

Application Notes

Application Notes are product specific complete configuration descriptions and configuration files for various SmartNode applications. Use these configurations as templates for your installation.

General Downloads
Application Description Download Size Type
Quick Start Guide This Quick Start Guide leads you through the basic steps to set up a new SmartNode and to download a configuration. Quick Start Guide
460KB
SmartNode 4552
Application Description Download Size Type
S-Bus Extension  Extend ISDN BRI lines from a PBX to a remote Office. Application Note
Branch Config
Main Config
305KB
3KB
3KB
PDF
Text
Text
PPPoE PPoE  Application Note
Main Config
140KB
5KB
PDF
Text
SmartNode 1200
Application Description Download Size Type
TEDAS Phoneware SmartNode Gateways in a TEDAS Phoneware Server environment Download
300KB
S-Bus Extension  Extend ISDN BRI lines from a PBX to a remote Office. Download
242KB
SmartNode 1400
Application Description Download Size Type
S-Bus Extension  Extend ISDN BRI lines from a PBX to a remote Office. Download
248KB
e-phone Gateway SmartNode Gateways in a e-phone environment. Download
210KB
TEDAS Phoneware SmartNode Gateways in a TEDAS Phoneware Server environment Download
395KB
SmartNode 4110 Series
Application Description Download Size Type
PLAR Hotline or PLAR configuration. Static IP on ETH0, call routing to remote SmartNode. Lift handset on local phone and a remote phone rings immediately.
Download
117KB
Terminal Gateway Terminal gateway configuration for LAN telephony systems. DHCP client enabled on ETH0, Gatekeeper auto-discovery enabled and default subscriber numbers for FXS0 – FXS7.
Download
180KB
Second Dialtone SmartNode 4000 Series used for FXS 2nd Dial-Tone Access.
Download
85KB
AIP Terminal Gateway
Download
411KB
SmartNode 4520 Series
Application Description Download Size Type
Broadband Cable Access Gateway Broadband cable access configuration. DHCP client enabled on ETH0, DHCP Server on ETH1, NAPT enabled, manual Gatekeeper registration, and default subscriber numbers for FXS0 – FXS7.
Download
124KB
Broadband DSL Access Gateway Broadband DSL access configuration. PPPoE subscriber on ETH0, DHCP Server on ETH1, NAPT enabled, manual Gatekeeper registration, and default subscriber numbers for FXS0 – FXS7.
Download
121KB
FXS-FXO
Application Description Download Size Type
2nd Dial-Tone Access SmartNode 4000 Series used for FXO 2nd Dial-Tone Access. Configuration Note 143KB

Configuration Files 2KB
Line Extensions SmartNode 4000 Series used for FXO Line Extension. Configuration Note 126KB

Configuration Files 3KB
Single Phone Access SmartNode 4000 Series used Single Phone VoIP and PSTN Access. Configuration Note 127KB

Configuration Files 2KB

Tel: +1 301-975-1000
sales@patton.com
   
Copyright© 2001-2008 Patton Electronics Co., All Rights Reserved  •  Sitemap  •  Legal  •  Privacy Policy  •  Disclaimer