K Modules Terminate and/or Extend up to 10km Away

GAITHERSBURG, Maryland - Patton Electronics announces the Model IM1/K G.703/G.704 QuikConnect Module and IM2RC/K Rear Card Module which provide E1/Fractional E1 termination and extension capabilities to the Patton NetLink mDSL modems (1095/1095RC). When used with a Patton mDSL modem, a G.703/G.704 line can be terminated or extended to a remote site up to 10km away.

There are two separate applications that can be employed when using the K Modules; Network Termination or Network Extension. In a Network Termination application, the G.703/G.704 line is terminated at the K Module and the clock and data is sent to the far end of the link. At the remote site, a Patton mDSL modem with a serial/Ethernet interface will be running the nx64 DTE rate. This application allows the remote user without a G.703/G.704 interface to extend the serial interface that is available to the G.703/G.704 access point without the need for a separate G.703/G.704 to serial converter. In the G.703/G.704 Network Extension application, two K Modules are employed, one at each end of the link. This application allows the user to extend the G.703/G.704 network over 10km away.

The K Module supports switch selectable AMI or HDB3 encoding, all nx64 kbps bit rates and both dual coaxial (75 ohm) and RJ-48C (120 ohm) G.703/G.704 terminations. The K Module is made in the USA. The K Module is CE marked and complies to applicable CTR standards.

About Patton
Patton Electronics Company is a US manufacturer and marketer of data communications products, including: Remote Access Products (V.90, K56Flex, V.34+, and ISDN dial-in), Last Mile/Local Loop Access Products (T1, E1, and xDSL modems, NTUs and CSU/DSUs), Multi-Service Access Products (Voice, Intranet, Extranet, and Frame Relay access), and Connectivity Products (interface converters, short range modems, multiplexers, and data line surge protectors). Patton Electronics is an ISO 9001 certified and BABT approved manufacturer. Patton products are CE marked and Y2K compliant. For more information or a free datacom catalog, please contact:

Patton Electronics Company7622 Rickenbacker DriveGaithersburg, MD 20879 USATel: (301)975-1000Fax: (301) 869-9293Email: [email protected]: https://www.patton.com

Western Europe Office - Tel: (+44) 1707-331447; efax: (+1 801) 340-2617Asia Pacific Office - efax: (+208) 728-1210Middle East/North Africa Office - Tel: (+961 1) 323-4270; efax: (+1 413) 832-9194Latin America/Caribbean Office - Tel: +1 (301) 975-1000; efax: +1 (520) 563-2265