Knowledgebase

SN46X8 SmartWare SWR 6.X Sample configuration SmartNode connected as trunk gateway between a SIP network and PBX with 4 S0 port.

Copy and paste the below config in to a text editor.
Replace all the values as described on the lines starting with a #

The Port S0 slot 0 port 0 is configured as fall-back and sync-port. It is configured in the user mode and should be connected to a PSTN. The ports slot 0 port 1 to 4 are configured as net and should be connected to a PBX. Not all the ports have to be connected

#-----------------------------------------------------------------#
#                                                                 #
# SN46XX                                                          #
# SMARTWARE 6.X                                                   #
#                                                                 #
# Sample configuration of context CS  and ISDN ports only.        #
# Without gateway and IP configuration.                           #
#                                                                 #
# SmartNode connected as trunk gateway between a SIP network      #
# and ISDN PBX with 4 S0 port. The Port S0 slot 0 port 0 (BRI 0/0)#
# is configured as fallback and sync-port. It is configured in    #
# user mode and should be connected to a PSTN.                    #
# The ports slot 0 port 1 to 4 are configured as net and should   #
# be connected to a PBX. Not all the ports have to be connected   #
#                                                                 #
# DATE:   2013-06                                                 #
# AUTHOR: Thomas Tlapak / Marc Aeberhard                          #
#         PATTON-INALP-NETWORKS; CH-3172 NIEDERWANGEN             #
#         WWW.PATTON.COM    WWW.INALP.COM                         #
#                                                                 #
#                                                                 #
#-----------------------------------------------------------------#

system
  clock-source 1 bri 0 0

profile dhcp-server DHCPS_LAN
  network 192.168.1.0 255.255.255.0
  include 1 192.168.1.10 192.168.1.99
  lease 1 minutes
  default-router 1 192.168.1.1
  domain-name-server 1 192.168.1.1

context ip router

  interface WAN
# Enter below the IP address and SubnetMask of the SmartNode
    ipaddress 172.16.10.10 255.255.255.0
    use profile napt NAPT_WAN

  interface LAN
    ipaddress 192.168.1.1 255.255.255.0
    tcp adjust-mss rx mtu
    tcp adjust-mss tx mtu

context ip router
  dhcp-server use profile DHCPS_LAN
# Enter below the default Gateway IP address, replacing the 172.16.10.1
  route 0.0.0.0 0.0.0.0 172.16.10.1 0

context cs switch

  routing-table called-e164 RT_CDPN_OUT
    route .T dest-service SERV_HG_2_OUT

  interface sip IF_SIP
    bind context sip-gateway GW_SIP
# Enter below the SIP server / Softswitch IP address or FQDN
    remote <0.0.0.0>
    trust remote
# Enter below the SIP account username, to be used for authentication
    address-translation outgoing-call from-header user-part fix <account number>
    route call dest-service SERV_HG_2_PBX

  interface isdn IF_ISDN_00
    route call dest-service SERV_HG_2_PBX

  interface isdn IF_ISDN_01
    route call dest-table RT_CDPN_OUT

  interface isdn IF_ISDN_02
    route call dest-table RT_CDPN_OUT

  interface isdn IF_ISDN_03
    route call dest-table RT_CDPN_OUT

  interface isdn IF_ISDN_04
    route call dest-table RT_CDPN_OUT
  
  service hunt-group SERV_HG_2_OUT
    drop-cause normal-unspecified
    drop-cause no-circuit-channel-available
    drop-cause network-out-of-order
    drop-cause temporary-failure
    drop-cause switching-equipment-congestion
    drop-cause access-info-discarded
    drop-cause circuit-channel-not-available
    drop-cause resources-unavailable
    route call 1 dest-interface IF_SIP
    route call 2 dest-interface IF_ISDN_00

  service hunt-group SERV_HG_2_PBX
    drop-cause normal-unspecified
    drop-cause no-circuit-channel-available
    drop-cause network-out-of-order
    drop-cause temporary-failure
    drop-cause switching-equipment-congestion
    drop-cause access-info-discarded
    drop-cause circuit-channel-not-available
    drop-cause resources-unavailable
    route call 1 dest-interface IF_ISDN_01
    route call 2 dest-interface IF_ISDN_02
    route call 2 dest-interface IF_ISDN_03
    route call 2 dest-interface IF_ISDN_04
  
context cs switch
  no shutdown

authentication-service SER_AUTH_OB
# Enter below the username and password of the SIP TRUNK Account.
  username <authentication username> password <authentication password>

location-service SER_LOC_CERT
# Enter the SIP Trunk accound or IP address
  domain 1 <sip domain>

#Enter the SIP TRUNK identity again
  identity <your sip identity>

    authentication outbound
      authenticate 1 authentication-service SER_AUTH_OB

    registration outbound
# Again set the SIP TRUNNK Domain or IP address
      registrar <URL or IP-address of registrar server>
      lifetime 300
      register auto

context sip-gateway GW_SIP

  interface IF_GW_WAN
    bind interface WAN context router

context sip-gateway GW_SIP
  bind location-service SER_LOC_CERT
  no shutdown

port ethernet 0 0
  medium auto
  encapsulation ip
  bind interface WAN router
  no shutdown

port ethernet 0 1
  medium auto
  encapsulation ip
  bind interface LAN router
  no shutdown

port bri 0 0
  clock auto
  encapsulation q921

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side user
      encapsulation cc-isdn
      bind interface IF_ISDN_00

port bri 0 0
  no shutdown

port bri 0 1
  clock auto
  encapsulation q921

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side net
      encapsulation cc-isdn
      bind interface IF_ISDN_01

port bri 0 1
  no shutdown

port bri 0 2
  clock auto
  encapsulation q921

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side net
      encapsulation cc-isdn
      bind interface IF_ISDN_02

port bri 0 2
  no shutdown

port bri 0 3
  clock auto
  encapsulation q921

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side net
      encapsulation cc-isdn
      bind interface IF_ISDN_03

port bri 0 3
  no shutdown

port bri 0 4
  clock auto
  encapsulation q921

  q921
    protocol pp
    uni-side auto
    encapsulation q931

    q931
      protocol dss1
      uni-side net
      encapsulation cc-isdn
      bind interface IF_ISDN_04

port bri 0 4
  no shutdown