Configuration Description
The example shows you how to bundle multiple PPP lines into one, using two subscribers. You may add additional lines and subscribers in the same way.
IMPORTANT: Both subscribers needs the same mulitlink settings
Command Sequence to copy, edit and paste
context ip router
interface IF_MLPPP
ipaddress unnumbered
point-to-point
use profile napt NAPT_WAN
context ip router
route 0.0.0.0 0.0.0.0 IF_MLPPP 0
subscriber ppp SUB_PPP_ETH
dial out
multilink max-links 2
authentication chap pap
identification outbound your_username_1 password your_password_1
bind interface IF_MLPPP router
subscriber ppp SUB_PPP_ADSL
dial out
multilink max-links 2
authentication chap pap
identification outbound your_username_2 password your_password_2
bind interface IF_MLPPP router
port ethernet "slot" "port"
medium auto
encapsulation ppp
pppoe
session SES_PPP_ETH
bind subscriber SUB_PPP_ETH
no shutdown
port ethernet 0 1
no shutdown
port dsl 0 0
pvc vpi "vpi" vci "vci"
pppoe
session SES_PPP_ADSL
bind subscriber SUB_PPP_ADSL
no shutdown
This answer was helpful
This answer was not helpful
