Knowledgebase

 
 
Knowledgebase Article
Knowledgebase > Unified Communications > SmartNode > ATA (Analog Telephone Adapter)


SmartLink M-ATA 3CX Fax Configuration
Article Id #: 336

This reference guide shows how a SmartLink M-ATA can integrated in a 3CX IPPBX environment. Using a SmartLink M-ATA, regular analogue Fax machines can be still used, even with an IP based PBX.

 

  1. Make sure the M-ATA is running the latest software found at:
    https://www.patton.com/support/upgrades/index.asp?um=M-ATA

 

 

2. Configure Sip Registrar and Domain. If Sip port is not configured, port 5060 is going to be used.  Now scroll to the bottom of the page and save the settings once completed.

 

 

3. For T.38 fax just make sure that “FAX without T.38(Use G.711 fax)” is unselected.  Now scroll to the bottom of the page and save the settings once completed.

 

 

4. Configure Phone 1 parameters (phone number, caller ID name, user name  and password).  Now scroll to the bottom of the page and save the settings once completed.

 

 

5. Restart the M-ATA to apply the config changes

 

6. On 3CX, just a regular extension is required to be configured

 

User Rating
This answer was helpful This answer was not helpful (1899 vote(s)) 
User Comments  Add a Comment )

 
 
 
Sales: sales@patton.com / +1 301 975 1000
Support: support@patton.com / +1 301 975 1007
Join Our Email List
Have Us Contact You
or
Login Connect With Us
Twitter Linkedin Facebook Youtube
 
     Patton Electronics Co. Copyright © 2001–2020 All Rights Reserved.

|  Sitemap  |   Legal  |   Privacy Policy  |   Disclaimer  |    Twitter  Facebook  YouTube  LinkedIn  RSS