Knowledgebase

 
 
Knowledgebase Article
Knowledgebase > Unified Communications > SmartNode > ATA (Analog Telephone Adapter)


SmartLink M-ATA 3CX Fax Configuration
Article Id #: 336

This reference guide shows how a SmartLink M-ATA can integrated in a 3CX IPPBX environment. Using a SmartLink M-ATA, regular analogue Fax machines can be still used, even with an IP based PBX.

 

  1. Make sure the M-ATA is running the latest software found at:
    https://www.patton.com/support/upgrades/index.asp?um=M-ATA

 

 

2. Configure Sip Registrar and Domain. If Sip port is not configured, port 5060 is going to be used.  Now scroll to the bottom of the page and save the settings once completed.

 

 

3. For T.38 fax just make sure that “FAX without T.38(Use G.711 fax)” is unselected.  Now scroll to the bottom of the page and save the settings once completed.

 

 

4. Configure Phone 1 parameters (phone number, caller ID name, user name  and password).  Now scroll to the bottom of the page and save the settings once completed.

 

 

5. Restart the M-ATA to apply the config changes

 

6. On 3CX, just a regular extension is required to be configured

 

User Rating
This answer was helpful This answer was not helpful (8785 vote(s)) 
User Comments  Add a Comment )

 
 
Products
Unified Communications
> VoIP Adapters
> Fax Adapters
> VoIP Gateways
> VoIP Routers
> VoIP IADs - Integrated Access Devices
> Enterprise Session Border Controllers
> Media Gateways
> SS7 Gateways
> Secure End Points (SIP Phones)
> VoIP Public Address & Mass Notification
Software and Cloud
> Virtual SBC | Virtualized SBC
> Virtual Access Router
> VPN Server
> IPv6 IPv4 Converter
> Intelligent Edge Orchestration
> NFV & SDN
Networking & Access
> Ethernet Extenders
> Industrial Switches
> Industrial Ethernet
> Unmanaged Industrial Ethernet Switches
> Managed Industrial Ethernet Switches
> Industrial PoE Switches
> PoE Extenders
> Industrial Network Solutions
> xDSL Products | DSL Modems, DSL VoIP, DSL Router Modems
> Routers
> Dial-Up Access

Sunset Products
 
Datacom Industrial Connectivity
> Industrial PoE Products
> Ethernet Over Fiber
> Line Drivers / Short Range Modems
> Wireline Analog Modems
> Pro AV Live & Media Broadcast Systems
> Fiber Serial DataCom (RS-232/422/530/188C)
> Fiber Telecom (T1/E1/PRI, Analog & ISDN)
> Multiplexers & Sharing Devices
> SFP (Small Form Pluggable) Modules and Kits
> Fiber Alarming, Notification, Relay & Control
> Other Network Extenders
> Defense/Security Fiber Communications
> Baluns
> Surge Protectors & Opto-Isolators
> DataTaps, Testers, Adapters, Rack Kits
> Interface Converters
> Fiber Rack & Enclosure Systems
> Fiber Repeaters & Wavelength Division Multiplexers (WDM)
> Waveguide RF Filters
Media Transport
> Artel Racks & Chassis Infrastructure
> Video Over IP Transport
> Video Over Fiber Transport
> Video, Audio & Data Over Fiber Transport
> Video & Audio Over Fiber Transport
> Ethernet Over Fiber Transport
> Serial DataComm Over Fiber Transport
> Video, Fiber Testers & Splitters
> Wave Division Multiplexers
> Ethernet Switches
> SFP Modules and Kits
 
Sales: [email protected] / +1 301 975 1000
Support: [email protected] / +1 301 975 1007
Join Our Email List
Have Us Contact You
or
Login Connect With Us
X Linkedin Facebook Youtube
 
     Patton LLC Copyright © 2022 All Rights Reserved.

|  Sitemap  |   Legal  |   Privacy Policy  |   Disclaimer  |    X  Facebook  YouTube  LinkedIn  RSS