Knowledgebase Article
| Knowledgebase > Network Access > OnSite > RocketLink |
|
||
| Adding a default gateway to the RocketLink 3202 management port. | |||
| Article Id #: 384 | |||
1) Console or Telnet into the unit and login. 2) Click on "enable" and enter Supervisor password with is "root" by default. 3) Go to "setup". 4) Go to “bridge” 5) Enter the Gateway address here 6) Go back to the main screen and go to “write” 7) Save the config and reboot the unit. The unit will now have a default gateway specified for the 3202. |
|||
| User Rating | |||
 This answer was helpful |
 This answer was not helpful |
(1758 vote(s))
|
|
| User Comments ( Add a Comment ) | |||
