Knowledgebase Article
| Knowledgebase > Unified Communications > SmartNode > SmartWare |
|
||
| How to configure Mitel 3300 with Smartnode FXS port | |||
| Article Id #: 472 | |||
The below screenshots shows how Mitel 3300 needs to be configured.       Below is the Smartnode configuration where # Smartnode IP= 10.10.10.10 # Mitel Ip = 10.10.10.11 # SIP Account 8998 context ip router interface eth0 ipaddress 10.10.10.10 255.255.255.0 tcp adjust-mss rx mtu tcp adjust-mss tx mtu context ip router context cs switch routing-table called-e164 RT_from_FXS route .T dest-interface SIP routing-table called-e164 RT_from_SIP route 8998 dest-interface SIP interface sip SIP bind context sip-gateway GWSIP route call dest-table RT_from_SIP remote 10.10.10.11 interface fxs FXS00 route call dest-table OUT caller-id-presentation mid-ring subscriber-number 8998 context cs switch no shutdown authentication-service AS username 8998 password 8998 location-service LS domain 10.10.10.11 identity-group default authentication outbound authenticate 1 authentication-service AS registration outbound registrar 10.10.10.11 register auto identity 8998 inherits default registration outbound context sip-gateway GWSIP interface ifsip bind interface eth0 context router port 5060 context sip-gateway GWSIP bind location-service LS no shutdown port ethernet 0 0 medium auto encapsulation ip bind interface eth0 router no shutdown port fxs 0 0 encapsulation cc-fxs bind interface FXS00 switch use profile fxs us no shutdown |
|||
| User Rating | |||
 This answer was helpful |
 This answer was not helpful |
(8786 vote(s))
|
|
| User Comments ( Add a Comment ) | |||
