Knowledgebase

 
 
Knowledgebase Article
Knowledgebase > Internal Knowledge Base


Patton Trinity SmartNode configuration with 3CX
Article Id #: 478
Patton SmartNode gateways running SmartWare can easily be configured and provisioned from within the 3CX Phone System.  Just select the model from the drop-down and fill in the necessary parameters, load it in the SmartNode and you are ready to start making and receiving calls.  This is great, but what if you have a new Patton SmartNode running Trinity?  How do you configure it like any other SmartWare SmartNode device in 3CX?

Don't waste any more time thinking about it as Patton just made it easy for you to accomplish this.  Patton has created new templates that are available to download and install into your 3CX Phone System.  Just a few simple steps and you will be configuring your Trinity SmartNode devices in no time at all.

Supported Products:

Trinity BRI SmartNodes (1-4 ports)

Trinity E1/T1 SmartNodes (1-4 ports)
Trinity FXO SmartNodes (1-8 ports)
Trinity FXS SmartNodes (1-8 ports).

Instructions to load Trinity Templates into 3CX (WINDOWS)

  1. Download the NewTemplate.zip file attached to this article.
  2. Extract the contents of the zip file into the ‘Downloads’ folder on your Windows machine.
  3. Once there, execute the .bat file
    • 3CX_Template_Move.bat

The template files are now added to the following Windows directories for your 3CX Phone System:

C:\ProgramData\3CX\Instance1\Data\Http\Templates\gateway
C:\ProgramData\3CX\Instance1\Data\Http\Templates\fxs

Instructions to load Trinity Templates into 3CX (LINUX)

The gateway templates are stored in the following directory:

/var/lib/3cxpbx/Instance1/Data/Http/Templates/gateway/

To add these new templates, copy and paste the following into the CLI of your Linux machine.

cd /var/lib/3cxpbx/Instance1/Data/Http/Templates/gateway/
wget https://patton.com/files/support/3cx-templates/NewTemplates.zip
unzip NewTemplates.zip



UPDATES


You can now add a Default IP Gateway and DNS Server within 3CX using the new templates.  The new sections will be under the 'Options' tab.





*** Patton Gateways can be used with your 3CX Phone System.  However, the templates are created, tested and supported by Patton.  Please contact our Support Team with any questions. ***

Instructions to load Trinity configurations into SmartNodes

  1. Enter in the IP Address of your SmartNode device
  2. Click the menu button () from the upper left-hand side
  3. Select System/Configuration Files and a window will pop-up. Click the + sign to add a new config.

 

 

  • Browse to the file and then add it as the ‘startup-config’ and click ‘OK’. The config will now be saved and loaded on next bootup.
  • To reboot the device, click the menu button () and select ‘Reboot’. Answer ‘Yes’ to the pop-up window to initiate the reboot.

Your SmartNode will now be successfully configured and registered to use 3CX.

Please contact Patton Support if you have any questions.

support@patton.com




Note From 3CX on Templates:

User Rating
This answer was helpful This answer was not helpful (8791 vote(s)) 
User Comments  Add a Comment )

 
 
Products
Unified Communications
> VoIP Adapters
> Fax Adapters
> VoIP Gateways
> VoIP Routers
> VoIP IADs - Integrated Access Devices
> Enterprise Session Border Controllers
> Media Gateways
> SS7 Gateways
> Secure End Points (SIP Phones)
> VoIP Public Address & Mass Notification
Software and Cloud
> Virtual SBC | Virtualized SBC
> Virtual Access Router
> VPN Server
> IPv6 IPv4 Converter
> Intelligent Edge Orchestration
> NFV & SDN
Networking & Access
> Ethernet Extenders
> Industrial Switches
> Industrial Ethernet
> Unmanaged Industrial Ethernet Switches
> Managed Industrial Ethernet Switches
> Industrial PoE Switches
> PoE Extenders
> Industrial Network Solutions
> xDSL Products | DSL Modems, DSL VoIP, DSL Router Modems
> Routers
> Dial-Up Access

Sunset Products
 
Datacom Industrial Connectivity
> Industrial PoE Products
> Ethernet Over Fiber
> Line Drivers / Short Range Modems
> Wireline Analog Modems
> Pro AV Live & Media Broadcast Systems
> Fiber Serial DataCom (RS-232/422/530/188C)
> Fiber Telecom (T1/E1/PRI, Analog & ISDN)
> Multiplexers & Sharing Devices
> SFP (Small Form Pluggable) Modules and Kits
> Fiber Alarming, Notification, Relay & Control
> Other Network Extenders
> Defense/Security Fiber Communications
> Baluns
> Surge Protectors & Opto-Isolators
> DataTaps, Testers, Adapters, Rack Kits
> Interface Converters
> Fiber Rack & Enclosure Systems
> Fiber Repeaters & Wavelength Division Multiplexers (WDM)
> Waveguide RF Filters
Media Transport
> Artel Racks & Chassis Infrastructure
> Video Over IP Transport
> Video Over Fiber Transport
> Video, Audio & Data Over Fiber Transport
> Video & Audio Over Fiber Transport
> Ethernet Over Fiber Transport
> Serial DataComm Over Fiber Transport
> Video, Fiber Testers & Splitters
> Wave Division Multiplexers
> Ethernet Switches
> SFP Modules and Kits
 
Sales: sales@patton.com / +1 301 975 1000
Support: support@patton.com / +1 301 975 1007
Join Our Email List
Have Us Contact You
or
Login Connect With Us
X Linkedin Facebook Youtube
 
     Patton LLC Copyright © 2022 All Rights Reserved.

|  Sitemap  |   Legal  |   Privacy Policy  |   Disclaimer  |    X  Facebook  YouTube  LinkedIn  RSS