Knowledgebase

Knowledgebase Article

Knowledgebase > Connectivity > FiberPlex
FiberPlex TD-1280/81 & TD-1580/81 Configurations
Article Id #: 492
The FiberPlex TD-1280/81 & TD-1580/81 units can be used 'back to back' in many configurations. A couple of notes, however: The TD-1280 is not a DTE unit, it is pinned out to connect to a DTE. This is clearly identified in the user manual, which can be found here. Take note of the pinout chart on page 6. On the 1280, pin 2 is a Send Data INPUT and pin 3 is Send Data OUTPUT. When used back to back they act as null modems. In this config, where they have decided to use two 1280, a signal input on pin 2 on one unit will be presented as an output on pin 3 of the other unit for example. Same is true for all paired signals – SD/RD, RTS/CTS, DSR/RR, ST/TT. Other single direction signals will just get lost in the back to back config and are only valid in a 1280 <-> 1281 config. You have advised him to cross pins 24 and 25, those two signals (TT and TM) are unrelated and will not cross These units are ‘transparent’ meaning none of the controls and clocks are used to receive the data, they are just passed through to the other side, therefore they can carry any kind of signaling Below is a table showing all of the valid connections and signal flow in this situation where you are connecting (2) TD-1280 back to back:
User Rating
This answer was helpful	This answer was not helpful	(8778 vote(s))
User Comments ( Add a Comment )

Company
> Contact Us
> About Patton
> Jobs
> Capabilities
> Quality & Responsibility
> Legal
News & Events
> Press Room/Releases
> Training & Events
> Library/Downloads

Partners & Resources
> Partner Programs
> Resources
> Blog

Products
Unified Communications
> VoIP Adapters
> Fax Adapters
> VoIP Gateways
> VoIP Routers
> VoIP IADs - Integrated Access Devices
> Enterprise Session Border Controllers
> Media Gateways
> SS7 Gateways
> Secure End Points (SIP Phones)
> VoIP Public Address & Mass Notification
Software and Cloud
> Virtual SBC | Virtualized SBC
> Virtual Access Router
> VPN Server
> IPv6 IPv4 Converter
> Intelligent Edge Orchestration
> NFV & SDN
Networking & Access
> Ethernet Extenders
> Industrial Switches
> Industrial Ethernet
> Unmanaged Industrial Ethernet Switches
> Managed Industrial Ethernet Switches
> Industrial PoE Switches
> PoE Extenders
> Industrial Network Solutions
> xDSL Products | DSL Modems, DSL VoIP, DSL Router Modems
> Routers
> Dial-Up Access

Sunset Products

Datacom Industrial Connectivity
> Industrial PoE Products
> Ethernet Over Fiber
> Line Drivers / Short Range Modems
> Wireline Analog Modems
> Pro AV Live & Media Broadcast Systems
> Fiber Serial DataCom (RS-232/422/530/188C)
> Fiber Telecom (T1/E1/PRI, Analog & ISDN)
> Multiplexers & Sharing Devices
> SFP (Small Form Pluggable) Modules and Kits
> Fiber Alarming, Notification, Relay & Control
> Other Network Extenders
> Defense/Security Fiber Communications
> Baluns
> Surge Protectors & Opto-Isolators
> DataTaps, Testers, Adapters, Rack Kits
> Interface Converters
> Fiber Rack & Enclosure Systems
> Fiber Repeaters & Wavelength Division Multiplexers (WDM)
> Waveguide RF Filters
Media Transport
> Artel Racks & Chassis Infrastructure
> Video Over IP Transport
> Video Over Fiber Transport
> Video, Audio & Data Over Fiber Transport
> Video & Audio Over Fiber Transport
> Ethernet Over Fiber Transport
> Serial DataComm Over Fiber Transport
> Video, Fiber Testers & Splitters
> Wave Division Multiplexers
> Ethernet Switches
> SFP Modules and Kits

Support & Services
> Support Home
> Support Portal
> Premium Support
> Software Upgrades
> Warranty Services
> Returns & RMAs
> Manuals

Special Projects Group (SPG)
> SPG Home
> Services & Capabilities
> Projects
> Facilities

Sales: [email protected] / +1 301 975 1000
Support: [email protected] / +1 301 975 1007

Login	Connect With Us

Patton LLC Copyright © 2022 All Rights Reserved.

| Sitemap | Legal | Privacy Policy | Disclaimer |