Knowledgebase Article
| Knowledgebase |
|
||
| SNMP implementation on Trinity | |||
| Article Id #: 505 | |||
Trinity only sends trap messages when an alarm of the internal alarm system is triggered (and will then stay silent about this particular alarm until the alarm is manually or automatically cleared). The following alarms are implemented:
The traps will always be sent with the same OID (1.3.6.1.4.1.1768.18.10) and contain a string describing the alarm that was raised. This is a part of Pattons custom enterprise subtree (1.3.6.1.4.1.1768). |
|||
| User Rating | |||
 This answer was helpful |
 This answer was not helpful |
(19 vote(s))
|
|
| User Comments ( Add a Comment ) | |||
