Knowledgebase

This FAQ shows a basic description on how to configure a SmartNode communicating with a SNMP-server. For those who already know how to configure the SmartNode, please refer to chapter 2 containing the most used OID and as well templates for Cacti.

• Chapter 1: How to configure the SmartNode
  
  All you need to do is replacing the value in { } and adapt the communities you would like to have read-only access (mandatory) or read-write access (optional). And, of course the IP/Host name of the SNMP server
  
  snmp community {public} ro
  snmp community {private} rw
  snmp target {NAME/IP_OF_SNMP_SERVER} security-name {public}
  snmp target {NAME/IP_OF_SNMP_SERVER} security-name {private}
  snmp host {NAME/IP_OF_SNMP_SERVER} security-name {public}
  snmp host {NAME/IP_OF_SNMP_SERVER} security-name {private}
  
  Fort detailed information about the configuration, please read the SmartNode configuration guide which is available in the following link.
  
  Manual
  
• Chapter 2: OID and Cacti template
  
  * workload CPU (cpuWorkloadCurrent) : .1.3.6.1.4.1.1768.100.70.10.2.1.2.1 ==> 64 bits Integer
  * Descrition (sysDescr) : .1.3.6.1.2.1.1.1.0 ==> Text field (ex : SN4961/4E1/...)
  * location (syslocation) : .1.3.6.1.2.1.1.6.0 ==> Text field (ex : My office...)
  * contact name (sysContact) : .1.3.6.1.2.1.1.4.0 ==> Text field (ex : M. Olivier Gaudet)
  * Number of connected call (gwCurrentConnectedCalls) : .1.3.6.1.4.1.1768.100.70.40.2.1.2.2 ==> 64 bits Integer
  * Number of total accumulated call since last reboot (gwTotalAccumulatedCalls) : .1.3.6.1.4.1.1768.100.70.40.2.1.4.2 ==> 64 bits Integer
  * Serial Number (sysNumber) : .1.3.6.1.4.1.1768.100.1.1.0 ==> string
  * System working since…(sysUptime) : .1.3.6.1.2.1.1.3.0 ==> 64 bits Integer (to be multiplied by 0.0000027778 to get it in minute)
  * Température (currentDegreesCelsius) : .1.3.6.1.4.1.1768.100.70.30.2.1.2.1 ==> 64 bits Integer
  * Version firmware (swVersion) : .1.3.6.1.4.1.1768.100.1.5.0 ==> Text field (ex : R4.2 2008-09-11 H323...)
  * State if port isdn 0 0 (IfOperStatus.1) : .1.3.6.1.2.1.2.2.1.8.1
  * State if port isdn 0 1 (IfOperStatus.1) : .1.3.6.1.2.1.2.2.1.8.2
  * State if port isdn 0 2 (IfOperStatus.1) : .1.3.6.1.2.1.2.2.1.8.3
  * State if port isdn 0 3 (IfOperStatus.1) : .1.3.6.1.2.1.2.2.1.8.4
  * State if port isdn 0 4 (IfOperStatus.1) : .1.3.6.1.2.1.2.2.1.8.5
  
  The template for Cacti is available on the following link.
  
  Template Cacti
  Homepage Cacti