Overview
The Model 1060 AC Powered, Asynchronous Short Range Modem is Patton's most sophisticated async twisted pair short haul. The Model 1060 adapts to a wide range of applications, while providing the resources to deal with less-than-optimum conditions. Supporting either hardware or software flow control, the Model 1060 operates both point-to-point and multipoint. The Model 1060 handles data rates to 115.2 kbps, and supports distances to 14 miles (22.5 Km) over two twisted pair. Because the line side is optically isolated and surge protected, you can install the Model 1060 in environments where EMR or ground loops would normally prohibit twisted pair data communications. Local and remote loopback tests and front panel LEDs aid in troubleshooting, while externally accessible DIP switches let you configure the Model 1060 without opening the case. Assignable control signals and DCE/DTE switchability complete the picture.
Highlights
Miniature 1060 Card Fits Rack Chassis & ClusterBoxes™
The Model 1060RC puts all the power and flexibility of the Model 1060 standalone into a 2U high rack card. Using mid-plane architecture, Patton's rack and cluster systems offer interchangeable interface cards and modem function cards. You can even swap cards with the power on!
The Model 1060 AC Powered, Asynchronous Short Range Modem is Patton's most sophisticated async twisted pair short haul. The Model 1060 adapts to a wide range of applications, while providing the resources to deal with less-than-optimum conditions. Supporting either hardware or software flow control, the Model 1060 operates both point-to-point and multipoint. The Model 1060 handles data rates to 115.2 kbps, and supports distances to 14 miles (22.5 Km) over two twisted pair. Because the line side is optically isolated and surge protected, you can install the Model 1060 in environments where EMR or ground loops would normally prohibit twisted pair data communications. Local and remote loopback tests and front panel LEDs aid in troubleshooting, while externally accessible DIP switches let you configure the Model 1060 without opening the case. Assignable control signals and DCE/DTE switchability complete the picture.
Highlights
Miniature 1060 Card Fits Rack Chassis & ClusterBoxes™
The Model 1060RC puts all the power and flexibility of the Model 1060 standalone into a 2U high rack card. Using mid-plane architecture, Patton's rack and cluster systems offer interchangeable interface cards and modem function cards. You can even swap cards with the power on!
- Low Profile Design Uses Only 2U of Rack Height
- Hot-Swappable-Unplug the 1060RC Without Disconnecting Cables
- Switchable Power Supply Accepts 115V or 240V AC
Features
- Data Rates to 115.2 bps
- Distances to 14 Miles (22.5 Km)
- Available In Desktop or Rack Card Versions
- Point-to-Point or Multipoint Operation
- Optically Isolated & Surge Protected
- Local and Remote Analog Loopback Test Modes
- External AC Power
- Tri-State LED Status Indicators
- Pin-Assignable Control Signals
- Both RJ-11 and Terminal Block Line Interfaces
- DCE/DTE Switch Selectable
- Made in the USA — This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.
|
