Knowledgebase

Configuration Description

Configuration to copy, edit and paste

profile call-progress-tone US_Dialtone
  play 1 0 350 -13 440 -13

profile call-progress-tone US_Alertingtone
  play 1 2000 440 -19 480 -19
  pause 2 4000

profile call-progress-tone US_Busytone
  play 1 500 480 -24 620 -24
  pause 2 500

profile tone-set default

profile tone-set US
  map call-progress-tone dial-tone US_Dialtone
  map call-progress-tone ringback-tone US_Alertingtone
  map call-progress-tone busy-tone US_Busytone
  map call-progress-tone release-tone US_Busytone
  map call-progress-tone congestion-tone US_Busytone

profile voip default
  codec 1 g723-6k3 rx-length 30 tx-length 30
  codec 2 g711ulaw64k rx-length 20 tx-length 20
  codec 3 g711alaw64k rx-length 20 tx-length 20 

context cs switch

routing-table called-e164 RT_PSTN_TO_SIP
  route .T dest-interface IF_SIP

interface sip IF_SIP
  bind context sip-gateway GW_SIP
# Enter below the SIP server / Softswitch IP address or FQDN
  remote <0.0.0.0>
  route call dest-interface IF_FXS_00
# Enter below the SIP username, to be used as user part in from header
  address-translation outgoing-call from-header user-part fix <username> host-part call

interface fxs IF_FXS_00
  route call dest-table RT_PSTN_TO_SIP

context cs switch
  no shutdown

authentication-service AUTH_SVC
# Enter below the username and passwort you got by VOIP provider
  username [XXX] password [YYY]
 
location-service LOCATION_SVC
# The line below requires the VOIP Providers domain name
  domain 1 [registrar IP or domain]

# Set the SIP username on the line below
  identity <username>

    authentication outbound
# Replace the XXX with the username of Authentication service
      authenticate 1 authentication-service AUTH_SVC username <username>

    registration outbound
# Set the Registrar IP or domainname of VOIP provider
      registrar 1 <IP or Domain>
      register auto

context sip-gateway GW_SIP

  interface IF_GWSIP
    bind interface WAN context router port 5060

context sip-gateway GW_SIP
  bind location-service LOCATION_SVC
  no shutdown

port ethernet 0 0
  medium auto
  encapsulation ip
  bind interface WAN router
  no shutdown
 
# Repeat the port fxs-part below if you have/need more fxs-interfaces
# for each FXS port an interface in context cs is required

port fxs 0 0
# (use etsi for europe instead of bell)
  caller-id format bell
# (use etsi or other country if not US based)
  use profile fxs us
  encapsulation cc-fxs
  bind interface IF_FXS_00
  no shutdown