Knowledgebase

 
 
Please also check out our Wizard Community Portal
 

Knowledgebase > Unified Communications > SmartNode > SmartMedia
Search Knowledgebase:  
 
Articles
>  Activating SnmpAgent
>  Activating the Configuration
>  Add NOA column in static routes.
>  Adding New Hardware In SmartMedia
>  Allocating a SIP Network Access Point (NAP)
>  Basic Steps to setup a SmartMedia configuration (SIP and ISDN)
>  Calculating the number of IVR channels required for your SN10k
>  Can SmartNodes with the SmartMedia Software be used as an STP?
>  Cannot receive calls on SmartNode when PRI port is using the DMS-100 protocol.
>  CAS R2 Scripting on SmartMedia
>  CDR Redundancy
>  Configuring Call Trace
>  Configuring Clocking on SmartMedia
>  Configuring Codec and Tode Detection on SmartMedia
>  Configuring ISDN on SmartMedia
>  Configuring SIP on SmartMedia
>  Configuring SnmpAgent
>  Configuring Text CDR in SmartMedia + Text CDR Variables
>  Configuring VoIP Interfaces
>  Create Line Interface
>  Create Line Service
>  Create the TDM network on SmartMedia
>  Creating a Static Route
>  Creating ISDN (q931) Stack on SmartMedia
>  Creating ISDN NAP(Network Access Point) on SmartMedia
>  Creating NAP(Network Access Point) on SmartMedia
>  Creating PortRange on SmartMedia
>  Creating Profiles on SmartMedia
>  Creating SAP( Service Access Point ) on SmartMedia
>  Creating SIP Stack on SmartMedia
>  Creating SIP TransportServer on SmartMedia
>  Do Virtual IP addresses respond to ICMP requests on the SN10k TelcoBoard?
>  Does the SN10K support clustering N+1?
>  Does the SN10K support Transcoding and how many SIP to SIP calls does it support?
>  Enabling Call Recording and Retrieve Recorded Files on SN10K
>  How do I add a user in a SmartMedia based SmartNode?
>  How do I reset the SN10k back to its initial configuration?
>  How do I upgrade the software package on the SN10k?
>  How does the 1+1 work on the SN10100 and how do you configure it?
>  How many components are redundant in the SN10K and are they hot swappable?
>  How many outbound registrations can the SN10k support?
>  How many Point Codes can a SmartMedia SmartNode have?
>  How to bypass the SN10k 10,000 stored call trace limit
>  How to change the amount of VoIP channels on the SN10K?
>  How to configure RADIUS with the SN10K.
>  How to upload a SN10K License file.
>  How to Use RegEx in Remapped Called and Calling Number Mask
>  Is it possible to configure different Point Codes for SS7 signaling and for voice traffic?
>  Mini Scripting development guide for SmartMedia
>  Number of available Voice Channels on the SN10K
>  Radius Accounting Authentication Association
>  Radius Accounting Authentication Redundancy
>  RADIUS CDR attributes
>  Reset the Host Role and change Internal IP Addresses on the SN10k
>  SIP Support on SN10K Products
>  SmartMedia - Load Balancing in Routing Script
>  SmartMedia 2.7 VOIP interface bonding
>  SmartMedia 2.8 physical, virtual, ip interfaces and their roles (Flexible IP)
>  SmartMedia 2.8 routing script parameters
>  SmartMedia: SDP profile configuration guidelines
>  SN10100 / SN10200 RJ45 Pinout
>  SN10100 and SN10200 High Availability mechanisms
>  SN10200 Routing based on MySQL Database
>  SN10300 High Availability mechanisms
>  SN10k - called number routing based on SIP Request URI (RURI)
>  SN10k - how to collect signaling traces
>  SN10k - implementing RADIUS Authorization into Routing Script
>  SN10K Call Handling Performance
>  SN10k IP Interface Descriptions
>  SN10k ISUP Specifications
>  SN10k MTP2 Specifications
>  SN10k MTP3 design and features
>  SN10k MTP3 Specifications
>  SN10k Route Retry theory and config
>  SN10k routing script - NOA based on Calling/Called Party Number
>  SN10k SIP-I support
>  SN10k SNMP - GET and TRAP examples
>  SN10k SNMP - supported MIBs
>  SS7 Support on SN10k products
>  STM-1: Automatic Protection Switching
>  T1 Loopback plug for testing both Line and CSU/DSU
>  Tone definitions on SmartMedia
>  What codecs does the SN10K support?
>  What is the "Accounts" tab under "Configurations" do in the SN10k?
>  What is the maximum size of the GTT Table in a SmartMedia SmartNode?
>  What is the number for the Maximum MSUs per second?
>  What types of Call Routing methods are supported in the SN10K?
>  What version of T.38 does the SN10K support?
>  Why is my SN10K getting an "IE: Cause NoCircuitChannelAvailable" message when placing a call from ISDN to SIP?
 
Products
Unified Communications
> VoIP Adapters
> Fax Adapters
> VoIP Gateways
> VoIP Routers
> VoIP IADs - Integrated Access Devices
> Enterprise Session Border Controllers
> Media Gateways
> SS7 Gateways
> Secure End Points (SIP Phones)
> VoIP Public Address & Mass Notification
Software and Cloud
> Virtual SBC | Virtualized SBC
> Virtual Access Router
> VPN Server
> IPv6 IPv4 Converter
> Intelligent Edge Orchestration
> NFV & SDN
Networking & Access
> Ethernet Extenders
> Industrial Switches
> Industrial Ethernet
> Unmanaged Industrial Ethernet Switches
> Managed Industrial Ethernet Switches
> Industrial PoE Switches
> PoE Extenders
> Industrial Network Solutions
> xDSL Products | DSL Modems, DSL VoIP, DSL Router Modems
> Routers
> Dial-Up Access

Sunset Products
 
Datacom Industrial Connectivity
> Industrial PoE Products
> Ethernet Over Fiber
> Line Drivers / Short Range Modems
> Wireline Analog Modems
> Pro AV Live & Media Broadcast Systems
> Fiber Serial DataCom (RS-232/422/530/188C)
> Fiber Telecom (T1/E1/PRI, Analog & ISDN)
> Multiplexers & Sharing Devices
> SFP (Small Form Pluggable) Modules and Kits
> Fiber Alarming, Notification, Relay & Control
> Other Network Extenders
> Defense/Security Fiber Communications
> Baluns
> Surge Protectors & Opto-Isolators
> DataTaps, Testers, Adapters, Rack Kits
> Interface Converters
> Fiber Rack & Enclosure Systems
> Fiber Repeaters & Wavelength Division Multiplexers (WDM)
> Waveguide RF Filters
Media Transport
> Artel Racks & Chassis Infrastructure
> Video Over IP Transport
> Video Over Fiber Transport
> Video, Audio & Data Over Fiber Transport
> Video & Audio Over Fiber Transport
> Ethernet Over Fiber Transport
> Serial DataComm Over Fiber Transport
> Video, Fiber Testers & Splitters
> Wave Division Multiplexers
> Ethernet Switches
> SFP Modules and Kits
 
Sales: sales@patton.com / +1 301 975 1000
Support: support@patton.com / +1 301 975 1007
Join Our Email List
Have Us Contact You
or
Login Connect With Us
X Linkedin Facebook Youtube
 
     Patton LLC Copyright © 2022 All Rights Reserved.

|  Sitemap  |   Legal  |   Privacy Policy  |   Disclaimer  |    X  Facebook  YouTube  LinkedIn  RSS